Tera-sample-per-second arbitrary waveform generation in the synthetic dimension

The synthetic dimension opens new horizons in quantum physics and topological photonics by enabling new dimensions for field and particle manipulations. The most appealing property of the photonic synthetic dimension is its ability to emulate high-dimensional optical behavior in a unitary physical system. Here we show that the photonic synthetic dimension can transform technical problems in photonic systems between dimensionalities, providing unexpected solutions to technical problems that are otherwise challenging. Specifically, we propose and experimentally demonstrate a photonic Galton board (PGB) in the temporal synthetic dimension, in which the temporal high-speed challenge is converted into a spatial fiber-optic length matching problem, leading to the experimental generation of tera-sample-per-second arbitrary waveforms. Limited by the speed of the measurement equipment, waveforms with sampling rates of up to 341.53 GSa/s are recorded. Our proposed PGB operating in the temporal synthetic dimension breaks the speed limit in a physical system, bringing arbitrary waveform generation into the terahertz regime. The concept of dimension conversion offers possible solutions to various physical dimension-related problems, such as super-resolution imaging, high-resolution spectroscopy, time measurement, etc

Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography

Defects produced during selective laser sintering (SLS) are difficult to non-destructively detect after build completion without the use of X-ray-based methods. Overcoming this issue by assessing integrity on a layer-by-layer basis has become an area of significant interest for users of SLS apparatus. Optical coherence tomography (OCT) is used in this study to detect surface texture and sub-surface powder, which is un-melted/insufficiently sintered, is known to be a common cause of poor part integrity and would prevent the use of SLS where applications dictate assurance of defect-free parts. To demonstrate the capability of the instrument and associated data-processing algorithms, samples were built with graduated porosities which were embedded in fully dense regions in order to simulate defective regions. Simulated in situ measurements were then correlated with the process parameters used to generate variable density regions. Using this method, it is possible to detect loose powder and differentiate between densities of ±5% at a sub-surface depth of approximately 300 μm. In order to demonstrate the value of OCT as a surface-profiling technique, surface texture datasets are compared with focus variation microscopy. Comparable results are achieved after a spatial bandwidth- matching procedure

Quantitative assessment of the mechanical properties of prostate tissue with optical coherence elastography

© COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. Prostate cancer (PCa) is a heterogeneous disease with multifocal origin. In current clinical care, the Gleason scoring system is the well-established diagnosis by microscopic evaluation of the tissue from trans-rectal ultrasound (TRUS) guided biopsies. Nevertheless, the sensitivity and specificity in detecting PCa can range from 40 to 50% for conventional TRUS B-mode imaging. Tissue elasticity is associated with the disease progression and elastography technique has recently shown promise in aiding PCa diagnosis. However, many cancer foci in the prostate gland has very small size less than 1 mm and those detected by medical elastography were larger than 2 mm. Hereby, we introduce optical coherence elastography (OCE) to quantify the prostate stiffness with high resolution in the magnitude of 10 μm. Following our feasibility study of 10 patients reported previously, we recruited 60 more patients undergoing 12-core TRUS guided biopsies for suspected PCa with a total of 720 biopsies. The stiffness of cancer tissue was approximately 57.63% higher than that of benign ones. Using histology as reference standard and cut-off threshold of 600kPa, the data analysis showed sensitivity and specificity of 89.6% and 99.8% respectively. The method also demonstrated potential in characterising different grades of PCa based on the change of tissue morphology and quantitative mechanical properties. In conclusion, quantitative OCE can be a reliable technique to identify PCa lesion and differentiate indolent from aggressive cancer

Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture

Unlike more established subtractive or constant volume manufacturing technologies, additive manufacturing methods suffer from a lack of in-situ monitoring methodologies which can provide informationrelating to process performance and the formation of defects. In-process evaluation for additive manufacturing is becoming increasingly important in order to assure the integrity of parts produced in this way. This paper addresses the generic performance of inspection methods suitable for additive manufacturing. Key process and measurement parameters are explored and the impacts these have upon production rates are defined. Essential working parameters are highlighted, within which the spatial opportunity and temporal penalty for measurement allow for comparison of the suitability of different nondestructive evaluation techniques. A new method of benchmarking in-situ inspection instruments and characterising their suitability for additive manufacturing processes is presented to act as a design tool to accommodate end user requirements. Two inspection examples are presented: spatially resolved acoustic spectroscopy and optical coherence tomography for scanning selective laser melting and selective laser sintering parts, respectively. Observations made from the analyses presented show that the spatial capability arising from scanning parameters affects the temporal penalty and hence impact upon production rates. A case study, created from simulated data, has been used to outline the spatial performance of a generic nondestructive evaluation method and to show how a decrease in data capture resolution reduces the accuracy of measurement

Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture

Unlike more established subtractive or constant volume manufacturing technologies, additive manufacturing methods suffer from a lack of in-situ monitoring methodologies which can provide informationrelating to process performance and the formation of defects. In-process evaluation for additive manufacturing is becoming increasingly important in order to assure the integrity of parts produced in this way. This paper addresses the generic performance of inspection methods suitable for additive manufacturing. Key process and measurement parameters are explored and the impacts these have upon production rates are defined. Essential working parameters are highlighted, within which the spatial opportunity and temporal penalty for measurement allow for comparison of the suitability of different nondestructive evaluation techniques. A new method of benchmarking in-situ inspection instruments and characterising their suitability for additive manufacturing processes is presented to act as a design tool to accommodate end user requirements. Two inspection examples are presented: spatially resolved acoustic spectroscopy and optical coherence tomography for scanning selective laser melting and selective laser sintering parts, respectively. Observations made from the analyses presented show that the spatial capability arising from scanning parameters affects the temporal penalty and hence impact upon production rates. A case study, created from simulated data, has been used to outline the spatial performance of a generic nondestructive evaluation method and to show how a decrease in data capture resolution reduces the accuracy of measurement

Microscale characterization of prostate biopsies tissues using optical coherence elastography and second harmonic generation imaging

© 2018 USCAP, Inc All rights reserved. Photonics, especially optical coherence elastography (OCE) and second harmonic generation (SHG) imaging are novel high-resolution imaging modalities for characterization of biological tissues. Following our preliminary experience, we hypothesized that OCE and SHG imaging would delineate the microstructure of prostate tissue and aid in distinguishing cancer from the normal benign prostatic tissue. Furthermore, these approaches may assist in characterization of the grade of cancer, as well. In this study, we confirmed a high diagnostic accuracy of OCE and SHG imaging in the detection and characterization of prostate cancer for a large set of biopsy tissues obtained from men suspected to have prostate cancer using transrectal ultrasound (TRUS). The two techniques and methods described here are complementary, one depicts the stiffness of tissues and the other illustrates the orientation of collagen structure around the cancerous lesions. The results showed that stiffness of cancer tissue was ∼57.63% higher than that of benign tissue (Young's modulus of 698.43±125.29 kPa for cancerous tissue vs 443.07±88.95 kPa for benign tissue with OCE. Using histology as a reference standard and 600 kPa as a cut-off threshold, the data analysis showed sensitivity and specificity of 89.6 and 99.8%, respectively. Corresponding positive and negative predictive values were 99.5 and 94.6%, respectively. There was a significant difference noticed in terms of Young's modulus for different Gleason scores estimated by OCE (P-value<0.05). For SHG, distinct patterns of collagen distribution were seen for different Gleason grade disease with computed quantification employing a ratio of anisotropic to isotropic (A:I ratio) and this correlated with disease aggressiveness